make_b1_hadamard_pulse#
- pypulseqpp.make_b1_hadamard_pulse()[source]#
Design a B1-selective pulse whose B1 sub-bands are signed by a Hadamard row.
The B1 counterpart of
make_hadamard_pulse(): rows are those ofscipy.linalg.hadamard(order), sub-bands are counted from the lowest B1, and row 0 is the plain band.flip_angle,time_bw_product, the ripples,dwell,delay,systemanduseare as inmake_slr_pulse(), except thedwelldefault of 0.0, which is the system’srf_raster_time.- Parameters:
amplitude (float) – RF amplitude the pulse plays at (T): the nominal B1.
passband_center (float, default=1.0) – Centre and width of the selected B1 band, relative to
amplitude. The pulse lasts about2 * time_bw_productover the width in Hz, that is overpassband_width * amplitude * gamma.passband_width (float, default=1.0) – Centre and width of the selected B1 band, relative to
amplitude. The pulse lasts about2 * time_bw_productover the width in Hz, that is overpassband_width * amplitude * gamma.pulse_type ({'st', 'ex', 'se', 'inv', 'sat'}, default='st') – Only maps the ripples onto the filter, as in
make_slr_pulse(); the flip isflip_angle.split_and_reflect (bool, default=True) – Split the sweep and reflect it about the pulse’s centre, which keeps the selectivity at large tip.
- Returns:
The pulse.
- Return type:
RfEvent
- Raises:
ValueError – If
orderis not a power of two,rowis out of range, the passband reaches zero B1, or the sub-bands are no wider than their transitions.