RadialStackReadout#
- class pypulseqpp.sequences.RadialStackReadout[source]#
Bases:
SequenceModuleRadial spokes in-plane with Cartesian partitions along z, a stack of stars.
The ADC samples the plateau. A slice rephaser may share an axis left invariant by the shot rotation. With
explicit=Truethe spokes are written out, one per entry ofangles; otherwise the caller rotates one base spoke per shot.A compact layout holds one base arm, which the caller rotates per shot; an explicit layout holds each rotated arm.
- Parameters:
system (pypulseqpp.Opts) – System limits.
rf (RfEvent) – Pulse that opens the repetition.
gz (GradEvent, default=None) – Selection gradient played with
rf.gz_reph (GradEvent, default=None) – Rephaser of
gz, left-aligned in the first block after the pulse (the TE wait if there is one, else the prephaser block). Only on an axis the shot rotation leaves unchanged: z for an in-plane acquisition, none for a projection.fov (float) – Isotropic in-plane field of view (m).
matrix (int) – In-plane matrix size; sets
kmax = matrix / (2 * fov).fov_z (float, int, default=None) – Partition field of view (m) and count. Stacks only.
matrix_z (float, int, default=None) – Partition field of view (m) and count. Stacks only.
te (float, default=None) – Echo time (s), from the RF centre to the centre crossing of the spoke.
Noneis as short as possible.tr (float, default=None) – Repetition time (s).
Noneis as short as possible.oversampling (float, default=1.0) – Readout oversampling: ADC samples per matrix point along the spoke.
readout_bandwidth_hz (float, default=250000.0) – Requested ADC sampling rate (Hz);
bandwidth_hzis the rate achieved on the ADC raster.spoiling_cycles (float, default=0.0) – Cycles of dephasing across
voxel_size_mleft at the end of the TR. Zero leaves the spoke rewound.voxel_size_m (float, default=None) – Length the spoiling is counted over (m);
Noneisfov / matrix.spoiling_axis ({'z', 'x', 'y'}, default='z') – Gradient channel of the spoiler.
n_echoes (int, default=1) – Traversals of the spoke per repetition, each retracing the same k-space coordinates with its own
ECOlabel.explicit (bool, default=False) – Write out one spoke per entry of
angles.angles (array_like, default=None) – In-plane spoke rotations (rad). Required with
explicitand rejected without it.labels (sequence of str, default=None) – Labels set to 0 on the acquisition block, to be changed per shot by the caller.
trigger (TriggerEvent or DigitalOutputEvent, default=None) – Event armed on the block that opens the readout.
- Attributes:
rf (RfEvent) – The pulse the module was given.
gz (GradEvent) – Its selection gradient, if one was given.
gz_reph (GradEvent) – Its rephaser, if one was given.
gx, gy (GradEvent) – The spoke from prephaser through rewinder.
gyis the same waveform at zero amplitude, so a rotation always has a y event to fill. Lists with one entry per angle whenexplicit.gz_pre, gz_rew (TrapEvent) – Partition encode and its rewinder. Stacks only.
gz_spoil (GradEvent) – End-of-TR spoiler; present when
spoiling_cyclesis nonzero.adc (AdcEvent) – The acquisition window, delayed onto the readout plateau.
adc_labels (LabelSetEvent or list of LabelSetEvent) – One per name in
labels.wait_te, wait_tr (DelayEvent) – Present only when
teortrexceeds the minimum.echo_time (float) – Echo time from the RF centre to the centre crossing (s).
echo_spacing (float) – Time between consecutive echoes (s); zero for a single echo.
bandwidth_hz (float) – Achieved ADC sampling rate
1 / dwell(Hz).n_samples (int) – ADC samples per traversal.
center_sample (int) – Index of the ADC sample at the k-space centre.
readout_duration (float) – Duration of the readout plateau (s).
n_arms (int) – Number of arm layouts: the angles when
explicit, else 1.
- Raises:
ValueError – If a count is out of range,
anglesandexplicitdisagree, orteortris shorter than the module can achieve.
Examples
>>> import pypulseqpp.sequences as design >>> import pypulseqpp as pp >>> system = pp.Opts(max_grad=40, grad_unit="mT/m", ... max_slew=150, slew_unit="T/m/s") >>> slab = design.SpatialSelectiveExcitation(system, 15.0, 0.12, is_slab=True) >>> readout = design.RadialStackReadout( ... system, slab.rf, slab.gz, ... fov=0.22, matrix=64, fov_z=0.12, matrix_z=16, ... ) >>> readout.gz_pre.channel 'z'
One spoke of one partition, and the k-space line it reads:
Methods
Return the blocks of one arm, as built. |
|
Build the module's block layout; implemented by the subclass. |
|
Publish events from the caller's locals and register keyword aliases. |
|
Publish named events, whether or not they were added to a block. |
Attributes